A turntable's output is unlike any other source in a home theater — it's a tiny, unequalized signal that needs a specific kind of amplification before it sounds right through any speaker. Plug one into a random line-level input and you'll get a thin, quiet, bass-light signal, which is the single most common reason a 'broken' turntable turns out to work fine.

The fix is making sure a phono preamp is in the signal path somewhere — built into the turntable, built into the receiver or speakers, or as a separate box. This guide covers how to tell what you already have and how to wire a turntable into either an AV receiver or a pair of powered bookshelf speakers.

Why a turntable needs a phono preamp in the first place

A turntable's cartridge generates a very weak electrical signal, and it's also recorded with an equalization curve (RIAA) that boosts bass and cuts treble to fit more music into a record's grooves. A phono preamp does two jobs at once: it amplifies that weak signal up to normal line level, and it applies the reverse RIAA curve to make the music sound correct instead of thin and harsh.

Every other common source — a streaming box, a game console, a phone over Bluetooth — already outputs a standard line-level signal, so it works on any aux, optical, or HDMI input. A turntable is the exception, which is why it needs its own input or its own small preamp box rather than just an open RCA jack.

Figure out where your phono preamp already lives

Check the turntable itself first: many budget and mid-range models now have a built-in preamp with a switch on the back labeled 'Line' and 'Phono.' Set to 'Line,' the turntable outputs a normal preamplified signal that can go into any standard aux input. Set to 'Phono,' it outputs the raw, unamplified signal and expects the next device in the chain to handle the preamp stage.

Next, check the receiver or speakers. An AV receiver input explicitly labeled 'Phono' has a built-in preamp and expects the turntable's raw signal (switch set to 'Phono,' or no switch at all on true audiophile tables). Any other input on a receiver — labeled 'Aux,' 'CD,' or similar — is a standard line-level input with no phono stage, so it needs the turntable's own preamp switched on, or a separate phono preamp box in between.

Connecting to an AV receiver

If the receiver has a dedicated Phono input: run the turntable's RCA cables straight into it with the turntable's own preamp switched off (or set to 'Phono'), and connect the turntable's ground wire to the receiver's ground screw if both have one — skipping this is the most common cause of hum.

If the receiver has no Phono input: either switch the turntable's built-in preamp to 'Line' and run it into any open Aux or CD input, or add a small standalone phono preamp box between the turntable and the receiver's line-level input if the turntable doesn't have its own preamp.

Connecting to powered bookshelf speakers

Some powered bookshelf speakers, like the Kanto YU6 covered in our powered bookshelf speakers roundup, include a built-in phono preamp on a labeled input — the turntable connects straight in with its own preamp switched off, exactly like a receiver's Phono input.

Most other powered speakers only have line-level inputs (RCA, 3.5mm, or optical), which means the turntable needs to supply its own preamplified signal. Switch the turntable's built-in preamp to 'Line' if it has one, or run a separate phono preamp box between the turntable and the speakers if it doesn't.

If the sound is quiet, thin, or humming

A faint, bass-light sound almost always means a phono stage is missing somewhere in the chain — double check the turntable's Line/Phono switch against the input it's plugged into. A persistent hum or buzz is usually a grounding issue: connect the turntable's dedicated ground wire to a ground terminal on the receiver or preamp box, since RCA cables alone don't always carry a clean ground.

Frequently Asked Questions

Can I plug a turntable straight into a soundbar?
Only if the turntable has its own built-in preamp switched to 'Line' and the soundbar has a spare RCA or aux-style input, which most soundbars don't — they're built around HDMI and optical TV connections. A pair of powered bookshelf speakers or a small receiver with a line or phono input is a much more reliable way to add a turntable to a system.
Do I need a separate phono preamp box?
Only if neither the turntable nor the receiver/speakers you're connecting it to has a built-in phono stage. If either end already has one, a separate box is an unnecessary extra link in the signal chain, though some hobbyists add one later anyway for a cleaner-sounding preamp stage than an entry-level built-in one.
Why does my turntable sound quiet and thin even though it's making a sound?
That's the classic symptom of a missing phono preamp stage — the raw cartridge signal is getting into the speakers without being amplified or RIAA-corrected. Check the turntable's Line/Phono switch against whatever input it's connected to; mismatching the two is the single most common cause.
What's causing a hum that goes away when I touch the turntable?
That's almost always a grounding issue. Most turntables have a separate thin ground wire in addition to the RCA cables — connect it to a ground screw or terminal on the receiver or phono preamp, since the RCA connection alone doesn't always provide a clean enough ground to prevent hum.

Keep reading