As an Amazon Associate, Home Theater Vault earns from qualifying purchases.

Wall-mounting a TV is one of the most common home theater upgrades, but most buying advice stops at "fixed, tilting, or full-motion" without saying which one actually fits a given room, and almost none of it mentions what to do with the soundbar that used to sit on the stand underneath. These picks cover all three mount types plus the one detail that trips up a lot of soundbar owners: once the TV is on the wall, the bar needs somewhere to go too.

None of these are the cheapest bracket you can find — we skipped mounts with no published weight rating or VESA compatibility list, since guessing on either one is how a TV ends up either not fitting the bracket or, worse, pulling loose from it.

Already have (or are shopping for) a soundbar? See our soundbar placement guide for where the bar should actually sit relative to a wall-mounted screen — it affects which of these mount types makes the most sense.

How we picked: We prioritized mounts with a clearly published weight limit and VESA pattern range, real tilt/swivel/extension specs rather than vague marketing claims, and enough spread across fixed, tilting, and full-motion designs to match a flush installation, a glare-prone room, or a fireplace install that needs the screen pulled out further.

At a glance

#PickWhy it stands outPrice
Sanus Advanced Full-Motion TV MountTop Pickoverall full-motion mount for most home theater TVs - Extends, tilts, and swivels enough to angle the screen for off-center seating, not just straight-on viewingCheck Amazon
ECHOGEAR Full Motion TV Wall MountRunner-uppulling a TV far out from a recessed wall or over a fireplace - Long articulating arm extension is specifically useful for mantels and recessed nooks where a short-reach mount can't bring the screen out far enough to view comfortablyCheck Amazon
Mount-It! TV Wall Mount with AV ShelfBest Valuemounting a soundbar directly under a wall-mounted TV - The built-in shelf solves the exact problem wall-mounting creates for a soundbar that no longer has a stand to sit onCheck Amazon
VIVO Low Profile Fixed TV Wall MountAlso greatultra-slim fixed mount for a flush, no-gap look - Sits closer to the wall than any tilting or full-motion mount here, which matters for a clean, custom-installed lookCheck Amazon
Mounting Dream Tilting TV Wall MountAlso greatbudget tilting mount for a bedroom or apartment - Noticeably cheaper than full-motion mounts while still tilting down to cut glare from overhead lightingCheck Amazon
Mounting Dream Full Motion TV Wall Mount for Large TVsAlso greatheavy-duty full-motion mount for large 75″+ TVs - Higher weight rating than most mid-size full-motion mounts, built specifically for large-format screensCheck Amazon

The picks in detail

Sanus Advanced Full-Motion TV Mount

Top Pick

9.6/10Editor’s score

Best overall full-motion mount for most home theater TVs

Compatibility Fits roughly 42–90″ TVs up to 100 lbs · Extends, tilts, and swivels · Tool-free leveling

  • Extends, tilts, and swivels enough to angle the screen for off-center seating, not just straight-on viewing
  • Tool-free micro-adjustments after mounting make it easy to level without taking the TV back off the wall
  • Covers a wide range of TV sizes and weights, so it fits most mid-to-large home theater screens

Watch out The articulating arm sits further off the wall than a fixed mount even fully retracted, so it's not the choice for the flush, low-profile look some rooms want.

Check price on Amazon

ECHOGEAR Full Motion TV Wall Mount

Runner-up

9.3/10Editor’s score

Best for pulling a TV far out from a recessed wall or over a fireplace

Compatibility Fits up to roughly 82″ TVs up to 130 lbs · Extends up to ~20″ · Built-in cable management

  • Long articulating arm extension is specifically useful for mantels and recessed nooks where a short-reach mount can't bring the screen out far enough to view comfortably
  • Built-in cable channels in the arm keep HDMI and power cords from dangling in view once the TV is extended
  • Built-in bubble level on the wall plate helps get the install straight without a separate tool

Watch out A longer arm flexes more at full extension with a heavier TV than a shorter-reach mount does, so check the weight rating against your specific TV rather than just the screen size.

Check price on Amazon

Mount-It! TV Wall Mount with AV Shelf

Best Value

9.0/10Editor’s score

Best for mounting a soundbar directly under a wall-mounted TV

Compatibility Shelf holds roughly 20 lbs · Tilting mount · Fits most 32–70″ TVs

  • The built-in shelf solves the exact problem wall-mounting creates for a soundbar that no longer has a stand to sit on
  • Shelf rides on the same bracket as the TV, so there's no separate floating shelf to buy, position, and level on its own
  • Still tilts for glare reduction even with a soundbar or streaming box sitting on the shelf

Watch out Shelf weight capacity is modest, so it suits a soundbar or streaming device, not a heavier AV receiver or stacked game consoles.

Check price on Amazon

VIVO Low Profile Fixed TV Wall Mount

Also great

8.7/10Editor’s score

Best ultra-slim fixed mount for a flush, no-gap look

Compatibility Fixed, no tilt or swivel · Lowest wall-to-screen gap of this group · Fits most 32–80″ TVs

  • Sits closer to the wall than any tilting or full-motion mount here, which matters for a clean, custom-installed look
  • Simple two-piece bracket design is straightforward to install without extra adjustment hardware
  • Noticeably cheaper than tilting or articulating mounts, since there's no moving hardware to build in

Watch out No tilt or swivel at all, so the TV's height and angle need to be right the first time — there's no adjusting for glare or a slightly-too-high mount afterward.

Check price on Amazon

Mounting Dream Tilting TV Wall Mount

Also great

8.4/10Editor’s score

Best budget tilting mount for a bedroom or apartment

Compatibility Fits roughly 26–55″ TVs up to 60 lbs · Tilt only · Low-profile bracket

  • Noticeably cheaper than full-motion mounts while still tilting down to cut glare from overhead lighting
  • Low-profile bracket keeps the TV close to the wall when not tilted
  • Includes a bubble level and standard stud-mounting hardware, which makes a first-time install more forgiving

Watch out No swivel or extension, so it's a poor fit for a corner installation or a room where you'd want to angle the screen toward a side seating area.

Check price on Amazon

Mounting Dream Full Motion TV Wall Mount for Large TVs

Also great

8.3/10Editor’s score

Best heavy-duty full-motion mount for large 75″+ TVs

Compatibility Fits roughly 42–86″ TVs up to 100 lbs · Full motion with dual arms · Extends up to ~24″

  • Higher weight rating than most mid-size full-motion mounts, built specifically for large-format screens
  • Dual-arm design distributes extended weight more evenly than a single-arm mount at full extension
  • Still tilts and swivels despite the higher weight capacity, rather than being a fixed-only heavy-duty design

Watch out The mount itself is large and heavy, so it needs solid stud placement and two people to install safely on a bigger TV.

Check price on Amazon

Frequently Asked Questions

Full-motion, tilting, or fixed — which TV wall mount do I actually need?
A fixed mount is the cheapest and sits closest to the wall, but only makes sense if the TV will already be at the right height and viewing angle. A tilting mount adds the ability to angle the screen down to cut glare from overhead lighting, which covers most bedrooms and living rooms. A full-motion mount adds extension and swivel on top of that, and is worth the extra cost specifically for off-center seating, a corner installation, or pulling the TV out from a recessed wall or fireplace.
Can I mount a soundbar on the same bracket as my TV?
Only with a mount that includes a built-in AV shelf, like the Mount-It! pick above — a standard TV wall mount has nowhere for a soundbar to sit once the stand underneath it is gone. See our soundbar placement guide for the alternative: wall-mounting the bar itself just above or below the screen using its own bracket.
How do I know what size TV wall mount to buy?
Check two things, not just your TV's screen size: the mount's weight rating against your TV's actual weight (printed in the TV's manual or spec sheet), and the VESA hole pattern on the back of your TV against the mount's supported VESA range. A mount rated for the right screen size but the wrong VESA pattern or weight simply won't install correctly.
Do I need to mount into wall studs, or will drywall anchors alone hold a TV?
For any TV of meaningful size and weight, mount into wall studs rather than relying on drywall anchors alone — drywall isn't rated to support that much weight on its own over time. If studs don't line up with the mount's bolt pattern, use a stud-rated mounting plate or toggle-bolt hardware designed for the mount's specific weight rating, not generic picture-hanging anchors.
Does wall-mounting the TV change where my soundbar should go?
Yes — once the TV is on the wall, the soundbar's old spot on a stand or console is often gone, and the main choice becomes mounting the bar just below or just above the screen. Our soundbar placement guide covers which position makes sense and the remote-sensor issue to check for before deciding.

Keep reading